Edgy Tiles

Edgy TilesSeveral tiles, such as stone and glass, rarely have finished edge tiles that will help in completing a back splash installation. Having said that, this would mean that the raw edge of the tile may be noticeable, especially where the back splash comes to an end. Regardless of the tile laid out in your house, you have an array of options available for finishing this area of the home. Moreover, tiling only a section of your floor or wall is a perfect solution to giving a break to large spaces. The change in texture and tone can also be helpful in bringing an exotic design feature.

To ensure this style is achieved with a premium quality finish, you will have to make use of tile trim – and fortunately there is a wide-ranging options available, from black to white and even slightly silver effect for that oh-so-lovely shimmery finish. You can use sloppy edges as well that would be striking against the nearby tiles; they are extremely eye-catching. The edges of tiles can also be given a finished look with the help of various techniques, like precise cutting, or special products, like molded ceramic tiles or metal edging strips. Regardless of which idea you choose to implement, edging your tiled surface precisely and accurately will contribute positively to a professional and neat-looking appearance.

Field tiles are tiles that hold the inside, rather than the outside, of a tiled surface. Tile professionals can cut field tile in order to size and fix it around the edges. The field tiles are fixed right at the edge and a minor cut piece of the identical tile is laid out under it on a vertical surface. However, this sort of tile edging works well only with tile with a clean edge, like stone tiles. On the contrary, glazed tiles usually have unappealing drips of glaze with numerous imperfections surrounding the edges, so it is always a good idea to leave them concealed.

Corner tiles are especially manufactured for surrounding the corners and creating edges. These are mainly classified as average, mortar-set tiles. Considering the fact that they are not flat, they develop angles, for instance, a counter top edge’s 90-degree angle, in order to fold over corners in a single piece. They are mostly molded and glazed so as to match the ceramic field tiles whereas stone tiles can be machined to make corners also. ‘Bullnose’ and ‘bullnosed’ also mean types of rounded tiles.

Metal corners, also commonly known as strips of metal edging, are primarily designed for usage at the edges of tiled surfaces. They are long pieces of metal with 90-degrees angle and often attached beneath the tiles’ essential elements, such as plywood and cement board among many others. The revealed part, after the process of installation, shows solely at the surface’s edge, rather than its horizontal plane. The strips are usually fixed before setting field tile so that the latter can be lined up with the edge at the time of installation.

http://www.houzz.com/ideabooks/10848992/list/5-edgy-trends-in-todays-tile